Carpet Cleaning in Bellingham, WA

When cleaning carpets, we keep in mind that you have a busy schedule, Therefore we would like to provide you with a professional cleaning service to your carpet. When choosing a Method of cleaning, we would like to discuss the best method that works for you. We recommend cleaning your carpet 2-3 times a year depending on what type of carpet you have and how frequently it gets dirty. We would usually say 1 time steam cleaning and then, a Dry carpet cleaning once or twice a year for residential cleaning. Now for commercial we recommend the low moisture encapsulation for a quick deep clean, That will provide a quick drying time. We believe that getting one job done a day but well done, is key Instead of doing 4 jobs a day and not well done. Whichever process we end up doing, We guarantee our highest quality, and if, in any case you are not satisfied we will do it again without a fee being charged.

Steam carpet cleaning

Steam carpet cleaning uses vaporized water to help break down dirt and oil particles. For this reason, we use the PE 5003 carpet extractor. This machine may seem insignificant as if won't work. Yet this machine was designated to clean even the most aggressive cleaning task. The PE 5003 increases water lift up to 205 inches meaning the drying process is quick. We also use a cylindrical brush machine. That agitates the carpet fiber in order to prepare them for the water extraction. We recommend steam cleaning once a year.

"Our Steam Cleaning Process"

1. Pre-Inspection
2 of our technicians will walk through your home with you to visually inspect the carpet. This will
give us the opportunity to estimate precisely.

2 .Pre- Vacuum
Vacuuming is very important, the vacuum process help eliminate bonded dry soil. We use a special vacuum that will not hurt the carpet.

3. Furniture Moving
We Help move some of the less dangerouse items for example tables, chairs and sofas. larger iteams like devices and china hutches are left behind.

4. Pre-Spray
A pre-spray is an agent that is applied to the carpet to break down soiled.

5. Pre-Spotting
During this process we remove stains difficult spots treated with special solutions to increase chances of removal.

6.Agitation
This is the process when we agitate and restore as much as we can from your carpet. Many times this is the most important. Agitating lifts and brings to the surface the dirt.

7. Soil Extraction
Just like agitation is an essential part, so is soil extraction. We start from the furthest part to the exit and extract with vaporized Agents to level out the ph of your carpet, So no sticky residue is left behind. At the same time extract the dirt and oil particles. that could stick back to your carpet.

8. Post Spot/Protector
Any spots or stains still remaining will get extra treatment with our many specialty spotting solutions. For longer carpet life and fewer permanent stains, be sure to have professional carpet protector applied to your carpet.

9.Speed Dry
High velocity air movers are placed during the carpet cleaning process to promote faster drying.

​10. Call Back
We make sure to call you back and ask you question on the results of the carpet.



Low Moisture Encapsulation

Low moisture encapsulation is an interim carpet maintenance method. An Encapsulant Solutions is sprayed into the carpet. Then, we use our CRB machine that has cylindrical brushes to crystallize the dirt. Then it's removed by vacuuming. As it is low water encapsulationcleaning method, promptly, the place is ready to use.This is a good choice for high traffic and commercial cleaning.

Dry Carpet Cleaning

Dry carpet cleaning is a dry process. It requires a cylindrical machine with chemicals that will help Remove Stain, Dirty, Grit, sand and Allergens. This a quick and safe way to go about avoiding steam cleaning but we still recommend 1 steam cleaning for every 2-3 dry compound cleaning.